WIP10G/13G/20G-V40 2.8-12mm Varifocal Lens Indoor Metal Housing Vandalproof Poe Mobile Dome P2P IP Camera
WIP-V40 2.8-12mm varifocal lens indoor metal housing vandalproof poe mobile dome p2p ip camera
Array IR: ￠12X6pcs, 40M
Indoor dome camera
Support Cloud(P2P) and mobile view
Support Onvif 2.3 stander version
Low illumination with ir on
Metal Housing, Vandalproof
With powerful remote device management software: CMS
|HD manual zoom Lens|
|Pixels||1.0 Megapixe||1.3 Megapixe||2.0 Megapixe|
|IR Status||Under 10 Lux By CDS|
|IR Power On||CDS Auto Control|
|Protocol||IPv4, IPv6, TCP/IP, IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP,RTSP/RTP/RTCP, IGMP,SMTP, FTP, DHCP, NTP, DNS, DDN PPPoE, CoS, QoS, SNMP, and 802.1X|
|ONVIF||Support ONVIF 2.3|
|IE Brower||Mozilla Firefox, Internet Explorer 7.x or above|
|Smart Phone||iPhone, iPad, Android, Android Pad|
|Day/Night||Color/ B&W (IR-CUT )|
|Image Config||Saturation/Brightness/Contrast /Sharpness, AUTO E W, White Balance, BLC,Horizon Flip,
|Operation Temperature||-20℃~+55℃ RH95% Max|
|Storage Temperature||-10℃ ~ +60℃ RH95% Max|
The house security camera has deep based and it will be more firm.It Support Cloud(P2P) and mobile view. Many clients like this models due to the special housing.
1.What are the advantages and disadvantages of fiber access?
Advantages: both transmission distance, high transmission bandwidth, security and good security, system performance and reliable. Disadvantages: not yet large-scale commercial applications, coverage is not wide, limited line resources, higher prices.
2.What is the characteristic of data transmission in network video surveillance system?
Network video surveillance system data flow is large, high real-time requirements. Generally single 25 frames / sec CIF format image stream size of about 384Kbps; single 25 frames / sec DI format image stream size of 384-1500Kbps, the average stream is 900Kbps, single 25 frames / second 720P format Image stream size of 1500-2500Kbps, the average bit stream for the 2000Kbps; In different industries, the user for the required image real-time, fluency requirements are different, according to the actual situation and specific problems.
3.How to do the network video surveillance system for network broadband plan?
The network video surveillance system network can be divided into three parts: front-end, the central service platform and the client is divided into three parts:
1)front-end bandwidth: the required broadband to estimate; such as a front-end only one video server to transmit all the way 25 frames/Seconds of the DIF-image, the required bandwidth is 384 kbps.
2)platform: the central service platform broadband is mainly two parts, part of the front-end equipment to upload the video stream; another Some of the video streams distributed to the client for the central service platform.
Public network operation of the central service platform Broadband planning can be based on a platform full load front 50% of the number of video simultaneously monitoring and concurrent scale planning.
3)client: time need to monitor the number of video decisions. As the bandwidth required for each video can be estimated, such as one video server transmits 25 frames per second of CIP images (still images), and the required bandwidth is about 384 kbps (the codestream may be increased to 512 kbps if the image is taken into account). If the number of simultaneous monitoring is n, the client side of the broadband plan is as follows: n * 512 (kbps).
4.How to install Network video surveillance system front-end equipment?
Network video surveillance system system front-end equipment installation needs to be specific for different equipment, in the installation before carefully read the product manual and installation requirements. The standard steps for installing the terminal device are as follows:
1)Unpacking confirm the completeness of the equipment listed in the product description.
2)Check the power supply voltage to prevent the equipment does not match the equipment damage.
3)to confirm whether the equipment working environment in line with the product manual on the equipment operating temperature, power and other environmental
4)control equipment manual power test, to confirm a variety of working status indicator to normal operation
5.Camera classification and features?
The camera is roughly divided into the following categories: bullet, dome camera, integrated camera, infrared day and night camera, high speed dome camera, network camera.
1) bullett: cheap, but do not have the zoom and rotation function, can only complete a fixed range of distance monitoring, hidden poor;
2)dome camera: a certain degree of concealment, while small size, beautiful, can be hoisted on the ceiling, make up for some of the shortcomings of the bullet;
3)integrated camera: built-in lens, you can automatically focus on the lens control convenience, installation and debugging simple
4)infrared day and night camera: the camera, protective cover, infrared light, power supply unit integrated into one of the camera equipment, with night vision distance, hidden strong, stable performance and other advantages;
5) high-speed dome camera: one set of machine-based camera and PTZ in a device, in addition to a fast tracking, 360 ° horizontal rotation, no surveillance blind area and privacy area shading and other features and functions;
WODSEE is one of the best wip10g/13g/20g-v40 2.8-12mm varifocal lens indoor metal housing vandalproof poe mobile dome p2p ip camera manufacturers and suppliers and we have one of the famous brands. You can buy or wholesale high quality and newest products with CE certification from our factory.