WIPS20-AKT60 Network Ip Camera Color Full Night Vision Outdoor Bullet Security Camera
WIPS20-AKT60 network ip camera color full night vision outdoor bullet security camera
Network camera Features :
Compatible with Hikvision Private Protocol
Smart Low Illumination; Smart ROI(4 ROI region)
Free P2P; ONVIF2.4; BLC; 3D-DNR; DEFOG; DWDR
Support auto IR-CUT filter removal function/ICR
Support: Milestone, NUUO, AXXON, igifort,avigilon
Apply to roads, warehouses, underground parking and other place which required definition picture quality.
|Min.Illumination||Low LUX: 1.0LUX（Color） 0.1LUX (B&W)||Low LUX: 1.0LUX（Color） /0.1LUX (B&W)||Low LUX: 0.1LUX（Color） /0.01LUX (B&W)||Low LUX: 0.1LUX（Color） /0.01LUX (B&W)||Low LUX: 0.6LUX（Color） /0.08LUX (B&W)||Low LUX: 0.1LUX（Color） /0.01LUX (B&W)|
|Electronic Shutter||1/2000 ~ 1/1000|
|Max Image Resolution||1280*960||1920*1080||1920*1080||1920*1080||4.0MP(2560×1440)||1920*1080|
|Frame Rate||12–25FPS ( Adjustable)||12–25FPS ( Adjustable)||9–16FPS ( Adjustable)||7–30FPS ( Adjustable)||4MP @20 FPS, 2MP @30FPS, 1~30 FPS adjustable||7–30FPS ( Adjustable)|
|Protocol||TCP/IP, HTTP, DHCP, DNS, DDNS, UDP,RTSP, PPPoE, SMTP, NTP, UPnP, FTP,etc|
|PC Client & Browser||UC2, IE,seetong|
|Mobile Phone||iPhone,iPad,Android Mobile|
|LAN||1 RJ45 10/100 ethernet port|
|Working Temperature||-10 C ~ + 50 C|
|Working Humidity||0% ~ 90%|
|Power Supply||DC12V ,1A|
1.Network video surveillance system monitoring center equipment how to control the big screen?
High-end users of the monitoring center most of the need for video wall display, in the network video surveillance system monitoring center through the digital decoding matrix for digital signal to analog signal conversion, and ultimately to the front-end equipment to switch to the TV wall.
2.How to install Network video surveillance system front-end equipment?
Network video surveillance system system front-end equipment installation needs to be specific for different equipment, in the installation before carefully read the product manual and installation requirements. The standard steps for installing the terminal device are as follows:
1) Unpacking confirm the completeness of the equipment listed in the product description.
2) Check the power supply voltage to prevent the equipment does not match the equipment damage.
3) to confirm whether the equipment working environment in line with the product manual on the equipment operating temperature, power and other environmental
4)control equipment manual power test, to confirm a variety of working status indicator to normal operation
3.How to choose a infrared camera?
Infrared camera is mainly used for the target needs day and night surveillance, with special emphasis on the need to monitor the night, and the target environment is not too strong light scene conditions. The specific choice based mainly on the camera and the target before the distance, the general distance of the infrared camera range of 20-100 meters, the farther away from the price the more expensive, while power consumption is also large.
In addition, the choice of infrared camera should consider the infrared light power switch control problems. This problem can be used both manual and automatic control.
4.Super low illumination camera and infrared led
First, you must choose the suitable lens. In order to improve the sensitivity of the camera to the infrared led and the sensitivity, as far as possible the use of large light through the lens, and pay attention to the use of auto iris or electric. Sencond, for variable lens, as far as possible to open a large aperture drive level value. Because the general increase with the focal length of the lens, the amount of light will be relatively reduced in the choice of infrared light to stay in a certain margin, and pay attention to the infrared lamp nominal indicators.
Second, the infrared led optional power supply should be as much as possible to meet the minimum required electric power, frequent exposure distance is not enough.
Third, to consider the degree of reflection of the camera scene, because the infrared light with the same visible light, such as reflection, refraction and other characteristics, so the target scene around if there is no good reflective environment (such as buildings, walls, signs) should be considered The distance margin.
4CH/8CH 1080P POE NVR KITS New Arrival
1080P 4CH/8CH POE NVR KITS, POE Power supply, no need normal power supply, no need POE switch, plug and play, support mobile app real-time viewing, quick and convenient.
NEW POE NVR (4CH/8CH)
GM8136S+PS5230, 1080P, IR distance 50M, Plastic housing, Onvif, Motion Detection, Privacy Masking, P2P
POE NVR specification:
1080P, Onvif, Motion Detection, P2P, VGA, HDMI, 1*SATA, 1*USB2.0
The POE Camera and POE NVR both the trend of the market, these POE NVR kits must help you win more market! Welcome inquiry and samples!
More info, please contact firstname.lastname@example.org
WODSEE is one of the best WIPS20-AKT60 IP Surveillance Camera IP Camera App support Starvis H.265/H.264 IP Camera manufacturers and suppliers and we have one of the famous brands. You can buy or wholesale high quality and newest products with CE certification from our factory.